I Product at a Glance
Product Description
Front View
1 Power/Ringtone Indicator
2 Income Volume Adjustment/Unlock the Gate
3 Answer/Hang up/Monitor
4 Ringtones Selection/Unlock the Door
5 Microphone
6 Speaker
Back View
7 Terminals and Connections
8 Power Port
2.Outdoor Unit
Front View
1 Microphone
2 Speaker
3 Call
4 User's Name
Detailed Photos
Back View
5 Terminals and Connections
Product Parameters
II Functions and Instructions
1) Calling
1.1 Under the standby mode, when "Call" Button of the outdoor unit is pushed, the indoor unit will be ringing for 30s.
1.2 Under the calling mode, when there is no answer, the call will be automatically hung up after 60s.
1.3 Under the calling mode, when "Answer" Button of the indoor unit is pushed, the ring will stop and the intercom
mode will start in which a two-way intercom of 60s can be made between the indoor and outdoor units. To stop the
intercom in advance, push "Hang up" Button of the indoor unit; the indoor unit will turn into the standby mode.
2) Unlocking
2.1 Under the intercom or monitoring mode, push "Unlock the Door" Button of the indoor unit to open the door, with
the unlocking time being 5s and unlocking current being 500mA or below.
2.2 Under the intercom or monitoring mode, push "Unlock the Gate" Button of the indoor unit to open the gate, with
the unlocking time being 1s.
3) Income Volume Adjustment
4.1 Under the standby mode, push "Income Volume Adjustment" Button of the indoor unit to adjust the income volume
among three levels: high, medium and low.
4) Ringtones Selection
5.1 Under the standby mode, push "Ringtones Selection" Button of the indoor unit to select a ringtone from 12 built-in
ringtones.
5) Power/Ringtone Indicator
6.1 Under the standby mode, the indicator light is red.
6.2 Under the calling mode, or during income volume adjustment and ringtones selection, the indicator light will turn
twinkling blue.
6.3 After the indoor unit ring for 30s, the blue indicator light will be off.
Installation Instructions
III Wiring Diagram (one outdoor unit with one indoor unit)
SPECIAL INSTRUCTIONS:
1) Distinguish positive and negative when connecting the indoor unit with power supply.
2) Distinguish the corresponding labels when connecting the indoor unit and the outdoor one.(Note: If the transmission line is 0-50
meters long, copper core cables of 0.5mm2 should be used while for 0-100 meters long, copper core cables of 1.5mm2 should be used. )
3) There is no positive and negative difference when connecting the outdoor unit with the gate lock.
4) Distinguish positive and negative when connecting the outdoor unit with the door lock.